Assetto Corsa Competizione – Update V1.8 And BMW M4 GT3 2022 Deployed

Assetto Corsa Competizione - V1.8 Update And BMW M4 GT3 2022 Deployed

Kunos Simulazioni has deployed Update v1.8 for the Assetto Corsa Competizione racing simulator. The update features new content, a number of graphical performance improvements, and a physic model evolution.

Check out the full changelog below for all the details.

V1.8 Update Highlights:

  • BMW M4 GT3 2022 as free DLC
  • Unreal Engine update (v 4.26)
  • NVIDIA DLSS implementation
  • AMD FSR implementation
  • Physics engine and tyre model updates

Content-wise the update adds the highly anticipated 2022 BMW M4 GT3 to the simulation, free of charge for all ACC owners.

With the BMW M4 GT3, a new top-of-the-range model joins the Customer Racing range at BMW M Motorsport. The BMW M4 GT3 will succeed the BMW M6 GT3. As of the 2022 season, private drivers and teams from all over the world will have the opportunity to challenge for victories and titles in the top car in the Customer Racing range, which is based on the next generation of BMW M4. 

The BMW M4 GT3 is being developed alongside the road car and is powered by a modified version of the S58 twin-turbo straight-six engine that delivers 500 bhp / 373 kW.

Furthermore, the Unreal Engine 4 that powers the core of the game, will be updated to v4.26. At the time of writing it was not clear if or how the ACC development team has used the new features of UE4. However, the update does allow further graphical improvements.

In Unreal Engine 4.26, the game author can render realistic or stylized skies, clouds, and other atmospheric effects with full artistic freedom, thanks to a new Volumetric Cloud component that is able to interact with Sky Atmosphere, Sky Light, and up to two directional lights. The atmosphere can receive volumetric shadows from meshes and clouds; lighting and shadowing updates in real-time to reflect time-of-day changes.

In addition, Unreal Engine v4.26 also sees the introduction of a new Water system, improvements to Chaos physics and to ray tracing, new GPU Lightmass, a completely new Virtual Camera system, enhanced DMX support, new Datasmith exporter plugins for Rhino and Naviworks…and the list goes on.

ACC Update v1.8 also implements support for NVIDIA DLSS and AMD FidelityFX Super Resolution. Both upscaling technologies can massively increase the graphics performance of the game.

Nvidia DLSS stands for deep learning supersampling. It is a deep learning advanced video rendering technique that can significantly boost the performance of a game. In essence, framerates are boosted by rendering frames at a lower resolution, after which the output is upscaled to a higher resolution. For instance, the game can be rendered in 1080P and then upscaled to output a 4K resolution without any significant quality loss over native 4K.

In order to use DLSS, you will need an RTX graphics card and a game or application that supports the NVidia DLSS feature. The biggest difference between the two technologies is that AMD’s FidelityFX Super Resolution technology will work on just about any GPU.

Last but not least, the V1.8 update will also improve the ACC Physics engine and tyre model. Stay tuned for the full changelog next week.


Official Webpage – www.assettocorsa.net/competizione


Assetto Corsa Competizione 2022 BMW  M4 GT3

V1.8 Changelog:

General:

  • Updated project to Unreal Engine version 4.26.2.
  • Added Fanatec GT World Challenge Europe 2021 season as bonus content with all entries, liveries and drivers and championship season.
    NOTE: certain entries are subject to DLC ownership.
  • Added all-new BMW M4 GT3 as bonus content as part of the 2021 season.
    NOTE: as with any major update, game menu settings (stored in menuSettings.json) will likely reset on first initialization.
  • IMPORTANT: reloading of Video presets will be necessary.
  • IMPORTANT: it is strongly suggested that custom engine.ini modifications and other third-party plugins (graphics or controllers) be removed before installing the update.

Graphics:

  • Added Nvidia Deep Learning Super Sampling (DLSS) 2.0 support for compatible GPUs (RTX 20XX series or newer). Please check manufacturer GPU driver requirements.
  • Added AMD FidelityFX Super Resolution (FSR) support for all GPUs. Please check manufacturer GPU driver requirements.
    NOTE: both DLSS and FSR are selectable and functional in Triple Screen and VR rendering modes.
    NOTE: DLSS is a temporal sampling method with a proprietary antialiasing solution, while FSR is a spatial upscaling method that can be used in combination with other Temporal AA solutions.
    NOTE: please read the in-game help texts in the Video Options to learn more about the functionality of each method’s respective sampling, antialiasing, and sharpening solutions.
    NOTE: DLSS implementation includes a custom DLSS dll version by Nvidia, manually updating to generic version releases might result in regression of image quality.
  • Added Temporal Antialiasing Gen5 option support.
  • Offers improved aliasing and clarity at a moderate performance cost. Optional over the existing TAAgen4 and KTAA implementations.
    NOTE: only functional with Temporal anti-aliasing mode selected.
    NOTE: FSR is incompatible with the Projection Correction view setting feature.
    NOTE: it is STRONGLY suggested to remove other open-source or third-party implementations of any of the features above (such as via OpenVR etc.)!
    NOTE: due to a large number of changes in rendering, it is STRONGLY suggested that custom engine.ini or third-party shader modifications be removed for this update!
  • Added the new rendering mode settings to save with Video Settings presets.
  • Fixed a limitation with Triple Screen rendering that did not allow Temporal Upsampling to be used in combination with it.
  • Updated global lighting and exposure on all tracks to follow Unreal Engine version changes.
  • Updated visual tone mapper presets to follow Unreal Engine version changes.
    NOTE: the updated tone mapper settings might produce slightly more saturation and contrast than in earlier versions, adjust per taste.
  • Revision of various track-related shaders to follow Unreal Engine version rendering changes.
  • Revision of various car-related shaders to follow Unreal Engine version rendering changes.
  • Skybox revision to suit Unreal Engine version rendering changes.
  • Optimized light emitters at Nurburgring for improved performance.
  • Reduced bezel gap artifacting appearing along the bezel lines in Triple Screen rendering mode.
  • Reduced SSAO and SSR artifacting around the bezel line in Triple Screen rendering mode.
  • Updated TV, cinematic and free cameras to use the new Unreal Engine cameras with improved DOF effects.
  • NOTE: this is a global change, old cameras are deprecated.
    Updated CinemaHUD to use the new and improved DOF effects.
  • Improved blurred wheel rim shader.
  • Improved car spray effect, especially in light/medium wetness situations.
  • Improved raindrop effect rendering logic to follow the updated spray effect.
  • Improved rainfall shader appearance in external cameras.
  • Car headlight shadow bias tweaks to prevent lights from penetrating walls at a close distance.
  • Updated track HLODs.
  • Added rotary switch animations, available with select cars.

Gameplay:

  • Added Open season, merging all game content into a “sandbox” season featuring grid customization.
    NOTE: individual official seasons remain playable with no change to their earlier functionalities.
  • Added opponent grid mixing option to Custom Race Weekend and Quick Race game modes in the Open season.
    Use the grid mixing sliders to set car group prevalence in the grid. GT3 car group has an additional setting for the preferred generation of opponent cars (all, pre-2019 or new-gen).
  • Added Open series championship mode with grid (car groups) and track lineup customization.
  • Fixed multiclass championships not splitting points per car group.
  • Automatically generated custom cars are now grouped into teams both in single-make custom mode and Open series championship.
  • Reworked driver assignment system to support custom-generated grids and various driver count requirements.
  • Standardized entry and team ID system across the whole game content in support of the Open series grid generation and championship.
    NOTE: it is recommended to restart ongoing championships, continuing pre-1.8 saves might not bring full functionality.
  • Removed entry duplication between the 2019 GTWCH and IGT seasons.
  • Fixed potential rule inconsistencies between official sprint and endurance game modes when played via Single Player and Championship.
    This also fixes the inconsistent auto-selection behavior of the MFD in these sessions depending on game mode.
  • Tweaked AI logic for strategic decisions reacting to weather changes.
  • Fixed a potential issue with AI pitstop status when loading a saved game, causing cars to DNF.
  • Improved AI genome at Bathurst, Barcelona, Laguna Seca, and Kyalami to reduce the chance of unforced driving errors.
  • Improved weather model: variability (=randomness in MP) now affects the variation and frequency of weather cycles:
    Higher variability will now produce larger variation and less predictability in the length of individual weather cycles (time between peaks).
    High variability might produce both fast changes or prolonged weather spells (or both combined) within the same weekend simulation.
    Low variability will produce more even weather cycles, akin to the pre-update model.
  • Revised skewed track limit definitions for Oulton Park that prevented correct gain calculation.
  • Revised pit speeding thresholds that were often too permissive, both on pit entry and pit exit.
  • Fixed invalid lap being eligible for personal and session fastest (purple) lap in race sessions (also in Multiplayer results).
  • Overhaul of track limit warnings on a wet track with its own dynamic, gain-based reference system.
  • Added measures against irregular driving before the green light in Hotlap and Hotstint game modes.
  • Fixed an issue with the Ferrari 488 GT3 (both versions) that resulted in an inconsistency in pitstop position versus other cars.
  • Replay: revised replay tyre rotation matrix calculation to avoid misalignment between tyres and rim (and reduce disk space).
  • The improvement is backward-compatible, while newly saved replays should occupy less disk space than before.

UI:

  • Revised season selector header in Single Player menu.
  • Added GTWCHEU 2021 season selection in Single Player.
  • Added Open series selection in Single Player.
  • Revised car selection page, added filtering per series lists.
    Applies to both Open series and Multiplayer car selection page.
  • Revised CinemaHUD interface and integration with DOF controls.
    NOTE: DOF mode defaults to disabled when the Free (F7) camera is toggled.
  • CinemaHUD now toggles off when switching to a non-free/F7 camera.
  • CinemaHUD now hides automatically when entering the garage page or exiting replay.
  • Added colored session labels in the Replay menu.
  • Added option to constrain the aspect ratio of TV cameras in wide or triple screen rendering modes to 16:9 (the center of the screen) – find in General Options.
  • Added session fastest (purple) lap holder indicator in standings, leaderboard and timer widgets.
  • Updated MFD pit strategy (auto)selection logic:
    Instead of automatic strategy increment after each stop, the strategy selection now does not change automatically but rather autoselects the next clean tyre set on the last active strategy.
    When all tyre sets are used, the selection goes to the least used set. Manual selection override is still possible via the MFD. With this, there is no longer need to preselect pitstop tyresets on the setup strategy page.
  • Added pitstop indicator and session fastest lap on the leaderboard HUD overlay.
  • Finer step increments for certain Video settings (exposure gain, image contrast, saturation).
  • Showroom: ESC/back restores UI opacity when UI hidden by middle click instead of directly exiting.
  • Showroom: added stance/camber to showroom cars and potential fix to a precision error leading to inconsistent wheelbase when losing/regaining application focus.
  • Statistics page: added option to clear personal best lap times for a given car/track combination.
    WARNING: This operation is permanent and cannot be undone.

Physics:

  • Physics engine optimizations: variable component tick frequency, optimized multithreading.
    It results in smoother single-player performance with a high number of AI and fewer spikes due to overloading single cores on heavy calculations (such as simultaneous collisions).
    Might not result in outright maximum fps gain, but a significantly lower single-thread occupancy and late steps can be expected, particularly with larger grids.
  • 400hz physics refresh rate.
  • Improved FFB.
  • Improved tyre flex.
  • Improved camber simulation, especially on high positive camber values.
  • Improved Outside, Mid, Inside tyre heating relative to camber.
  • Improved Outside, Mid, Inside tyre wear relative to camber.
  • Improved camber gain simulation, affecting slip angles and forces. Evident with high camber values over curbs and longitudinal bumps.
  • Improved surface flash temperature tyre simulation. Wider range of heat generation.
  • Improved heat generation in extreme conditions (burnouts, donuts).
  • Improved heat generation relative to tyre pressure.
  • Improved core temperature retaining. Tyres dissipate heat significantly slower now, no need to wait right until the last moment to go to grid.
  • Completely revised and improved combined grip simulation.
  • Completely revised and improved tyre vibrations at high speed and high slip angles.
  • Improved slip angle/ratio simulation relative to cold and overheating tyres.
  • New viscoelastic rubber friction model.
  • Improved dynamic tyre characteristics in various temperature conditions.
  • New rubber bumpstops damping simulation.
  • Implemented bumpstops damping values for all cars.
  • Improved engine throttle simulation.
  • Improved launch control.
  • Improved rev limiter behavior (soft limiters on some cars).
  • Improved traction control simulation.
  • Improved brake duct heating influence simulation.
  • Improved rain tyres behavior (note: not necessarily easier).
  • Improved the simulation of brake efficiency and power.
  • Improved track grip simulation on and off the racing line.
  • Improved ambient vs. track temperature delta.
  • Added a condition that simulates mist and dew during the night in certain temperatures.
  • Improved certain track condition simulation, including the speed of puddle formation.
  • Fixed Lamborghini Huracan GT3 and Huracan GT3 Evo front steer rod geometry.
  • Fixed excessive rear bump steer on the Nissan GT-R GT3.
  • Fixed excessive rear bump steer on the Lexus RC F GT3.
  • Fixed an issue with setup boundaries.
  • Added dedicated 2021 GTWCHEU season BOP for participant tracks.
  • Added Open series BOP (currently matching the 2021 season BOP), functioning as a moving BOP with the latest seasons. Most importantly it also serves as the basis of Multiplayer BOP.
  • Added 2021 British GT season BOP using the latest DHE tyres when a British GT-exclusive track is played through the 2021 season or the Open series (or Multiplayer).
  • Updated IGTC BOP to use the latest DHE tyres when IGTC-exclusive tracks are played through the 2021 season or the Open series (and Multiplayer).
  • Additionally, updated Mount Panorama to the latest available BOP when played through the 2021 season or the Open series (and Multiplayer).
    NOTE: the original IGTC and British GT seasons in Single Player continue to use the original 2019 BOP with corresponding tyres that the original DLC packs recreated!

Controls:

  • Updated wheel manufacturers’ SDKs.
  • Added Thrustmaster SF1000 display support.
  • Added Damper option under FFB settings – controls how much damping is allowed through the wheel driver’s DI Damping setting.
  • Increased FFB frequency steps to correspond with the global physics frequency update.

Multiplayer:

  • Revised car groups, merging the CUP and ST groups into a single GTC group for matchmaking and server filtering.
    Note that CUP and ST remain represented as separate subgroups on the track map, leaderboards, and results.
    Results dump now also includes car group to allow better filtering when parsed.
  • Stats: revised and merged grouping of statistics per race track.
    Note that tracks are only separated per season whereas an older season might produce faster lap times due to higher track grip (such as the fresh asphalt on Silverstone 2018).
  • Stats: fixed an issue that had a tendency to generate unrealistic personal best lap times.
    Note that pre-1.8 incorrect PB laps can be cleared manually on the Statistics track breakdown page.
    WARNING: This operation is permanent and cannot be undone.
  • Multiplayer track seasons are now deprecated and all track configurations point to the Open series (currently matching the latest, 2021 season, see Physics notes).
    Note for admins: the old season suffixes in the server configuration will remain there for legacy functionality, but they will no longer create a difference in the track/BOP version!
    Server track configuration (event.json) should use the non-suffix version in continuation, e.g. “Misano” instead of “misano_20XX”.
    Note for users: no matter the server config, Multiplayer will always use the latest Open series configuration from Single Player.
  • Further revised final corner penalty thresholds with the widget formation type when the back of the field is likely to receive the green light inside or coming out of the final turn.
  • Ratings: fixed an issue that could erroneously produce a 100 (or 00) CC rating at Spa.
  • Protocol change – old server versions are obsolete and will not register on the backend.
Assetto Corsa Competizione 2022 BMW  M4 GT3
Assetto Corsa Competizione 2022 BMW  M4 GT3